RUBBERMASTER/A & A Melters are Approved by Material Manufacturers
Port Moody, BC, Canada. January 12, 2012 - A & A Melters (www.aamelters.com), manufacturers of the RUBBERMASTER line of air jacketed melters, are approved for use with the leaders in material manufacturing for waterproofing.
Here are just some testimonials from Material Manufacturers approving our melters for use with their waterproofing materials:
“Based on the successful field experience of one of our largest approved applicators, field observations by our technical services department, and our recent telephone conversation, American Hydrotech, Inc. approves the use of the RUBBERMASTER line of air-jacketed kettles for the preparation of Hydrotech’s Monolithic Membrane 6125….”
- Edward J. Tierney, Manager - Technical Services, American Hydrotech, Inc. “The RUBBERMASTER roofing kettle has proven to be excellent equipment when used for both our mop-able and squeegeed types of hot rubberized asphalt. The kettle brings our products to correct pumping temperature and is approved for use with our material.”
- Phil Nyberg, Tremco Ltd.
“…We can confirm that the RUBBERMASTER under fired kettle has been used satisfactorily with our modified asphalt elastomeric waterproofing coating #7125 Elastoseal Membrane. You will note that oil bath kettles are specified for both products. That is because the sheets were written up before your type of kettle came on the market. When we next print these sheets, we will have to modify the wording to specify the use of asphalt kettles with no hot spots that include charring of the modified asphalt.”
- Blair Anderson, Insulmastic
“We are pleased to confirm, Permaquik 6100 membrane has been successfully heated in your RUBBERMASTER kettle. The indirect heating of hot rubberized asphalt by way of air as opposed to the traditional oil is an interesting concept and should prove more economical”
- Rolf Brockman, Executive Vice President, Permaquick Corp.
“We at Carlisle coatings recommend the use of RUBBERMASTER melters for our products. Our applicators are very happy with the quick and even heat up time, and the dependability of the equipment.”
- Tim Eorgen, Carlisle Coatings and Waterproofing ### About A & A Melters
A & A Melters is a family run business who thrives to please our customers. We recently took over the RUBBERMASTER line of rubberized asphalt melters, and have been working with and building roofing equipment for more than 20 years. We have been working with some employees for 15 years, and are proud of it. Since taking over RUBBERMASTER, we have made many changes due to customer feedback. We listen to all ideas our customers may have, and try to incorporate the ones that will work best for those special needs. Please check out our website, www.aamelters.com, and if you have any questions or feedback, give us a call at 1-888-469-4480 or 604-469-4480 or email us roger@aamelters.com.
|
